In design space select new project.

Then go to image search and select the following images:

Rooster (x2): #M4BE820F3

Chickens (x2) : #M4B38266A 

Duplicate the each image (via duplicate or copy & paste)

Create 4 squares with dimensions of 4x4 and fit the chickens in the "coaster" squares to ensure the right size and fit. 

Then select each square and chicken combo and select "Attach". This will assit with weeding.

Alternatively you can use my project located here for a quick start:

https://design.cricut.com/landing/project-detail/64caec57521784a23aaf9f6b

Make sure your hands are clean and dry when handling the infusible ink.

Unroll infusible ink from package. You will notice there are 2 ink sheets, 2 butcher paper sheets and a lint free cloth included in the packaging.

You will only need 1 sheet of ink and 1 sheet of butcher paper for this project (coaster set of 4).

Place 1 sheet of black infusible ink on a standard grip mat (green) ink-side facing up with a bryer tool to ensure no bubble or bumps.

Once your ink is set up on the mat, hit the "Make it" button in design space.

In the mat preview - TURN ON -  Mirror Image.

Load the mat into the machine and hit the cricut button to begin cutting.

While your chickens are cutting, prep your coasters and heat press for heat transfer.

Wipe coasters with the lint free cloth provided making sure to remove all dust particles.

If the coaster has excessive dust use an alochol wipe or alcohol on a separate cloth and wipe again with the lint free cloth provided as the final step.

Set the heat press (Easy Press 2) to 400 F and timer at 60 seconds using the easy press mat.

If you are using a different press please refer to the cricut heat press guide.

Select your press type, infusible ink transfer sheet and square coasters.

Heat press guide: https://cricut.com/heatguide

Remove the negative space with the infusible ink by gently rolling the mat.

You will hear a crackling sound that will remove some of the removable ink.

The remainder of the negative space and square can be removed with the weeding tool and tweezers. 

This part takes a little patience due to the fine details of the cut.

Cut out each coaster square.

Once weeded apply the infusible ink sheet - ink-side down to the coasters as shown below.

If it is not sticking well you can secure it with heat transfer tape on the edges.

I used heat transfer tape only on the top and bottom of the coasters.

Place 1 sheet of white cardstock on cricut heat press mat to avoid transfer to your mat.

Place coasters with infusible ink on the carstock on the mat. (You can do multiple coasters at a time).

Add butcher tape on top of coasters.

Gentley place easy press on butcher paper and apply no pressure.

Set timer and wait for beeping sound to remove.

Remove heat and wait until the coasters are complelety cooled.

Coasters will be extremely hot!

Once cooled remove butcher paper and infusible ink sheet slowly.

If there are any areas where the sheet is stuck, use tweezers to remove the stuck area to prevent smudging with fingers.

Wallah - You're done! Enjoy a farm fresh drink or cocktail on your new coasters!

These also make a cute gift stacked and tied with a ribbon!